Print your own door sign

The acquaintance with a company, office or practice often begins with a door sign that hangs at the entrance. This outdoor sign is usually printed in a printing house, because it has to be weatherproof and the information has not changed for a long time. This is also where all the signage for the company or practice begins.

The door signs that are used in the interior present information that has to be exchanged very often. They are door signs that you can print yourself . You print inserts yourself and as often as necessary. The designs of the insert labels are different, you can always find a suitable one. A small overview of it below.

Print door signs with frames yourself

The door signs with frames underline the lettering on the sign and set clear accents. Such removable frames are available in different versions.

The door sign with a stainless steel frame has an elegant, high-quality look. The frame can be placed sideways or up and down. The inscription is protected with a transparent PVC cover , which allows for its quick replacement. To insert or replace the print, the cover is bent slightly, removed and bent back into the frame slot after the lettering has been inserted. The door sign with a stainless steel frame is very easy to use and is mounted on the wall with the screws .

The door sign removable frame made of aluminum profile has a combined frame: it is made of aluminum at the top and bottom, the side parts are made of colored plastic. This can be very helpful: the side parts can be used to color code different departments of the company or practice. The cover of the removable frame is made of polystyrene anti-reflective glass . The clever design makes it very easy to change the printing material. To do this, you have to pull off the side panels, slide the cover to the side and change the insert.

Print frameless door signs yourself

If the frame on the sign is not desired, frameless door signs come to the rescue, which fit almost any ambience.

The curved door sign has an elegant design thanks to a slight curvature and frameless look . The whole shield is made of transparent polycarbonate , which protects the printed material from all sides. A new insert for this door sign can be quickly exchanged at any time. You don't have to remove the sign from the wall, just open the front panel from one side.

The wall sign / clip-on frame is also made from high-quality injection-moulded transparent polycarbonate, but is flat. Thanks to its flat design, the wall frame can not only be mounted on the wall with screws , but also fixed to a smooth surface with double-sided adhesive tape . The frameless look of this sign is timelessly elegant, this is a very robust and flexible solution for self-printing . Various information, whether notes, internal company information or company guidelines, can be exchanged easily and at any time.

Tamper evident interchangeable doorplates

The big advantage of the following door signs is that they have reliable protection against manipulation and are therefore ideal for areas with a high number of people.

The door sign with integrated anti-pilfer device is one of them. With its measured flat optics, it suits any decor. The base plate of the sign is made of colored ABS, the transparent anti-reflective cover is made of PMMA. The wall sign is tamper-proof , ie it has the built-in removal protection and the pressure exchange is only carried out with a removal key. You can prepare the lettering yourself with a computer and then print it out . The print is made on paper with a standard printer.

EasyFix overview sign with aluminum frame and acrylic glass front pane has a stylish, modern look. The disk is fixed to the upper part of the frame and must be pulled out to exchange the pressure. The lettering can be done on paper or foil . The blade version with anti-theft protection is equipped with a locking mechanism that can only be opened with the removal key.

Extra flat door signs to print yourself

The next two door signs for self-printing can also be called tamper-proof and differ from others by their extra-flat appearance .

The cassette sign and the exchangeable door sign look extremely elegant and tidy with the high-quality stainless steel cassette . The extra flat acrylic glass cover lies very flush in the cassette, it is almost impossible to remove it without tools. In order to replace the print template in the shield , use one or two handling suction cups to remove the cover.

These wall signs are available in the most common formats. If the sign width is 150 mm, the cassette signs can be combined and used with a suitable vacant/occupied display . This gives an additional opportunity to use the signs for medical practices, meeting or conference rooms.

Interchangeable door signs with spacers or adhesive layer

While the door signs described above are attached to the wall with screws for self-printing, the other sign models also offer other mounting options - with wall spacers or with double-sided adhesive tape .

The high-quality spacers underline the brilliant acrylic glass look and set beautiful accents. The signs consist of two plates, the lettering is inserted between them. In order to replace the lettering, you have to remove the sign first. The door signs can be mounted with four ( door sign Durable Crystal Sign ) or with two ( acrylic glass interchangeable sign ) spacers .

This high-quality insert label differs greatly from this: it does not have to be removed to change the print. The insert sign consists of 3 acrylic glass panes , the middle one is cut to the appropriate format. The insert is simply pushed in between the panes without having to remove the sign. A colored edge of the sign ensures a harmonious visual effect of the notices. This door hanger also has a cut-out on the back for tamper protection .

If you are not allowed to drill into the wall or door, the self-adhesive wall sign is recommended. The self-adhesive wall information pocket is firmly attached to all smooth surfaces and the paper insert can be quickly replaced. It is made of transparent injection-moulded polycarbonate and enables a frameless presentation of the information. The front cover is easily opened and closed for changing the paper insert . The self-adhesive wall sign is a perfect solution for self-printing and can be removed at any time without leaving a trace.